Septic tanks are widely used all around the world due to effective and low-cost maintenance of wastewater; besides, you are not dependent on your local sewage system, and thus you don’t need to pay them any fees.
But, on the other hand, the septic tank needs to be serviced time after time.
As most of the septic tanks are buried in the ground, it is important that you know the exact location of it so that you can service it whenever required. Poor maintenance of septic tanks can pollute the groundwater and will create severe health hazards.
Professionals working in this field charge you money for locating the septic tank alone, and thus it makes the whole process expensive for many people. Having said that, sometimes professionals do also find it hard to discover an underground septic tank.
While there are several ways to locate the underground septic tank, the easiest and most cost-effective method is to use a metal detector.
The metal detector works even if your septic tank is made of concrete; the reinforcement bars can be detected by a detector. Some septic tanks use steel manhole covers which also help in tracing it with a metal detector.
The process is not a breeze of cool air as it seems; in order to locate the septic tank with a metal detector, you don’t only need to know how the metal detector works, but you should also know the possible location of the septic tank; otherwise, you will keep searching for it around your house all day with a metal detector.
Normally the septic tank is buried nearly 20 feet away from your house, but it is not the same in all cases.
To help you in this regard, here we are to going to present you with a comprehensive article where you will find out how to find a septic tank with a metal detector.
Once you have read it thoroughly, not only will you be able to locate your septic tank, but it will also help you in using the metal detector in a better way, which you can use to find out other metallic objects.
How Metal Detector Works?
To put it into simple words, metal detectors works by sending electromagnetic signals via a search coil, and if there is an object you are looking for, the transmit signal will hit that object and will retransmit the signal to the detector.
In this way, the detector will signal you if there is an object found. There are many different kinds of metal detectors available using different techniques for searching; however, you don’t need to go into details of it. We can use a regular working metal detector to find out the septic tank.
Where to Check For a Septic Tank
The critical thing in locating a septic tank with a metal detector is to know where to find it. A house can be as big as it may take a whole day to cover with a metal detector.
There are a few handful tips, as mentioned below, you need to look for when checking for a septic tank.
- Normally, the septic tanks are located outside the house on your lawn; the grass may look different around the septic tank as compared to the surroundings.
- The other thing which may help you in search out is the ground level. The ground level may be a little higher or lower where the septic tank is situated.
- The septic tank will probably be located where all pipes of your house are routed; take a round of your surrounding, and you will surely get an idea of it.
- If the above tips didn’t work out, then you need to see the drain exit. If it is connected with a septic tank, you can use a pumping snake and a metal detector to track down the path and the septic tank.
Find Septic Tank with Metal Detector
Now, as you know how the metal detector works and you also know where to look for a septic tank, there are some tricks you can apply to do the job in a perfect manner. At the end of the day, doing the task efficiently and timely is what we all want.
To start with, you need to make sure that you are using a good quality metal detector; the more depth it can reach, the easier it will be to locate the septic tank.
It is preferred that you use a metal detector that you have already used and are familiar with. If you have not used the metal detector before, then it is suggested that you get familiar with it before using it to search septic tank.
Do check out the components of the metal detector; all of it should be working fine. Set appropriate settings and parameters as many metal detectors come with different settings, and it allows you to set them accordingly.
Safety is most important at all times. Do make sure that you take all precautionary measures and do not go out of line in finding out the septic tank.
Keep the metal detector close to the ground, and if you follow the tips mentioned in the section where to check for septic tank, then you are going to find it out in no time without facing any difficulty.